So you’ve recently purchased your own electric car? Congratulations! Electric cars (EVs) are enjoyable to drive, good for the planet, and simple to maintain. What’s the next move, then?
The following stage is generally determining how to power the new vehicle. More crucially, how to recharge your electric motor at the house. You must configure your Electric Vehicle Service Equipment (EVSE). EVSE stands for electric vehicle charging infrastructure. They’re compatible with both BEVs and PHEVs (plug-in hybrid electric vehicles).
About: Electric vehicle chargers are officially incorporated into the vehicle. An EVSE transfers electricity from the house’s grid to the car’s built-in charger, which then charges your vehicle and keeps both automobile and home safe. The Electric vehicle charger also interacts with the EV, telling it when it’s correctly plugged in and secure to recharge.
Most people charge their electric vehicles using either Level 1 or Level 2 charging, based on the brand and type of their car.
Because they function with regular household outlets, Level 1s do not even require any additional installation. Since most EVs come with a Level 1 charger, it is by far the least expensive choice.
Which One Should You prefer Level 1 or Level 2 Charging?
Level 1 charging, on the other hand, is by far the oldest and most inconvenient way of charging the vehicle, requiring up to the full day to fully charge. The majority of consumers want a faster charging option. Because the bulk of electric vehicle charging points occurs at home, having a high-quality, efficient EVSE is critical. As a result, a Level 2 charge is strongly advised. A level 2 EVSE can charge your car at 240v, which can recharge most electric cars in less than 4 hours vs a full workday or over with a level 1 station.
It’s crucial to think about the arrangement of your residence, basement, and where your car will be stored before choosing an EVSE. The very next step is to select the appropriate one for your car’s make and model. The greater the charging amps, the quicker it will recharge, and various EVs have varying charging speeds. As electric vehicles and batteries improve, investing in an Electric Vehicle charging station with the highest possible amperage is a wise decision, as your Electric vehicle charger will be set to a maximum charging rate in the future.
And don’t fear: the vehicle will only accept the maximum possible amps from a Level 2 charging, but even if it charges more slowly than that other vehicle, it will always charge as quickly as it can. Using a Level 1 for a PHEV can perform for some. But if you want a Level 2, acquiring EVSE with lesser amperage can suffice; however, relying on the EV may recharge the car more slowly.
Level 2 Charging
Hardwired or connected to a 240v power, Level 2 EVSEs are available. Our professional technicians will set up your EVSE at the place of your choice. They will assist you with all specifics, including establishing whether or not your existing power system seems to have enough power to support your new Electric Vehicle charger. When determining whether to hardwire your Level 2 chargers or get a plug-in type, examine the mobility issue and determine whether this is something you require. A NEMA 14-50 plug is commonly used to connect a plug-in Level 2 EVSE to the grids.
If you do not even have anything like this nearby or around the residence and wherever you leave your car, having an electrical installation is an important part of the procedure. You might indeed want to have an electrical engineer install a few NEMA 14-the 50s based on where you place your car so that you can fully charge wherever you want. Based on the home’s design, installing a few outlets, such as in your entrance and basement, may be the best solution.
This, along with a Level 2 power adapter, would provide maximum versatility. Level 2s are much more costly and need installation, but they are exceedingly practical, productive, and simple to use. All you have to do now is plug this in every evening or whenever your automobile is not in use to wake up to a full battery vehicle.
Level 3 Charging
If you require a charge that is speedier than Level 2, you should choose a Level 3 charger. “Fast Charging stations” is another name for a level 3 charger. The Level 3 EVSE provides 480 volts, which is twice as much as the Level 2 EVSE. DC Fast Charge is a very rapid and effective method of charging. It can recharge your car completely in around 30 minutes, depending on the type and manufacture. Users can’t afford Level 3s right now because they’re so costly, and so many residences can’t handle the increased amperage required with their current switchboards. If you run a business with such a car park, however, Level 3 is an excellent client amenity.
Superior EV Charging Solutions is there to assist you. You are just a call away from us.
Our Recommendation
Zappi is an innovative smart Electric charger. It not only functions as a conventional electric car charger, but it also offers to charge modes that use 100% GREEN energy provided by your solar PV or wind power. The zappi charger is simple to set up and use.
